# Invocation command line: # /home/guee/spec2006/bin/runspec -c r7-5800u int # output_root was not used for this run ############################################################################ backup_config = 0 # 0：运行benchmark时不备份配置文件。 ignore_errors = yes # 1或yes：子项运行时出错时仍然继续进行后续测试。reportable测试时此选项会被忽略。 action = validate # validate：构建（如果需要）、运行、检查正确性并生成报告。 tune = base # 默认的测试类型，也可以写 peak，或者 all，可在runspec参数中指定。 check_md5 = 1 # 通过MD5来验证配置文件是否与已编译的测试集二进制文件匹配，如果不匹配就强制重新编译。 reportable = 1 # 1或yes：默认为产生正式报告的测试，int或fp对应的测试集中会完整运行3遍。 mean_anyway = 1 # 1或yes：即使部分子项运行失败，也总是计算总成绩，正式测试时忽略该选项。 verbose = 9 # 测试过程中输出调试信息的详细程度，级别为1到99。 output_format = asc, csv,html, screen, pdf, config #需要输出测试报告的类型，当screen存在且verbose>=9时，每个子项测试完成后会在屏幕上立即显示成绩。 makeflags = -j 4 # 并行编译的数量，加快测项项目的编译速度。 flagsurl000 = /home/guee/spec2006/config/flags/flags-gcc-linux64-revA.xml teeout = 0 #设置为0时，运行benchmark时不显示运行的命令行 # 设置编译器，下面 int 和 fp 分别表示编译int测试集和fp测试集的编译器 int=default=default=default: CC = gcc-8 CXX = g++-8 OBJ = .o fp=default=default=default: CC = gcc-8 CXX = g++-8 FC = gfortran-8 OBJ = .o ##################################################################### # 编译器优化参数 #################################################################### default: M64_OPT = -m64 -Ofast -mavx2 AVX = -march=native UNROLL = -funroll-all-loops FASTNOSTATIC = $(M64_OPT) $(AVX) $(UNROLL) FASTSTATIC = $(FASTNOSTATIC) -static ################################################################ # Base 模式的编译器优化参数，测试 int 性能时使用。 ################################################################ int=base=default=default: COPTIMIZE = $(FASTNOSTATIC) CXXOPTIMIZE = $(FASTNOSTATIC) FOPTIMIZE = $(FASTNOSTATIC) ################################################################ # Base 模式的编译器优化参数，测试 fp 性能时使用。 ################################################################ fp=base=default=default: FOPTIMIZE = $(FASTNOSTATIC) COPTIMIZE = $(FASTNOSTATIC) CXXOPTIMIZE = $(FASTNOSTATIC) ##################################################################### # 32/64 bit，为解决代码可移植性而添加的编译器参数，写在 PORTABILITY 后面。 ##################################################################### default: PORTABILITY = -DSPEC_CPU_LP64 -fno-strict-aliasing ##################################################################### # 测试集各个子项的可移植性参数标识，为解决默认时代码与编译器或其它库的兼容性问题。 ##################################################################### 400.perlbench=default=default=default: CPORTABILITY = -DSPEC_CPU_LINUX_X64 -std=gnu90 416.gamess=default=default=default: FPORTABILITY = -funconstrained-commons -std=legacy 447.dealII=default: CXXPORTABILITY= -include cstdlib -include cstring -include cstddef -std=c++03 450.soplex=default=default=default: # CXXPORTABILITY = -DSPEC_CPU_CASE_FLAG -DSPEC_CPU_LINUX -std=c++03 CXXPORTABILITY = -std=c++03 462.libquantum=default=default=default: CPORTABILITY= -DSPEC_CPU_LINUX 481.wrf=default=default=default: CPORTABILITY = -DSPEC_CPU_CASE_FLAG -DSPEC_CPU_LINUX FPORTABILITY = -std=legacy 483.xalancbmk=default=default=default: CXXPORTABILITY = -DSPEC_CPU_LINUX ################################################################# # 下面是计算机的相关信息 ################################################################# default=default=default=default: license_num = test_sponsor = guee tester = guee hw_avail = May-2021 sw_avail = July-2021 hw_cpu_char = AMD Ryzen 7 5800U with Radeon Graphics hw_cpu_mhz = 1900MHz~4400MHz hw_fpu = Integrated hw_memory000 = 16 GB (2 x 8GB DDR4 3200) hw_model = AMD Ryzen 7 5800U with Radeon Graphics hw_ncores = 8 hw_ncoresperchip = 8 hw_nthreadspercore = 2 hw_ncpuorder = 1 hw_other = None hw_pcache = 256KB I + 256KB D on chip per core hw_scache = 4MB I+D on chip per chip hw_tcache = 16MB I+D on chip per chip hw_ocache = None hw_vendor = AuthenticAMD int=default=default=default: sw_compiler = gcc/g++ 8.4 sw_base_ptrsize = 64-bit sw_peak_ptrsize = 64-bit fp=default=default=default: sw_compiler = gcc/g++/gfortran 8.4 sw_base_ptrsize = 64-bit sw_peak_ptrsize = 64-bit sw_parallel_other = no # The following settings were obtained by running 'specperl $[top]/Docs/sysinfo' default: notes_plat_sysinfo_000 = Sysinfo program /home/guee/spec2006/Docs/sysinfo notes_plat_sysinfo_005 = $Rev: 6775 $ $Date:: 2011-08-16 #$ 8787f7622badcf24e01c368b1db4377c notes_plat_sysinfo_010 = running on r7-5800u Mon Aug 9 05:41:57 2021 notes_plat_sysinfo_015 = notes_plat_sysinfo_020 = This section contains SUT (System Under Test) info as seen by notes_plat_sysinfo_025 = some common utilities. To remove or add to this section, see: notes_plat_sysinfo_030 = http://www.spec.org/cpu2006/Docs/config.html#sysinfo notes_plat_sysinfo_035 = notes_plat_sysinfo_040 = From /proc/cpuinfo notes_plat_sysinfo_045 = model name : AMD Ryzen 7 5800U with Radeon Graphics notes_plat_sysinfo_050 = 1 "physical id"s (chips) notes_plat_sysinfo_055 = 16 "processors" notes_plat_sysinfo_060 = cores, siblings (Caution: counting these is hw and system dependent. The notes_plat_sysinfo_065 = following excerpts from /proc/cpuinfo might not be reliable. Use with notes_plat_sysinfo_070 = caution.) notes_plat_sysinfo_075 = cpu cores : 8 notes_plat_sysinfo_080 = siblings : 16 notes_plat_sysinfo_085 = physical 0: cores 0 1 2 3 4 5 6 7 notes_plat_sysinfo_090 = cache size : 512 KB notes_plat_sysinfo_095 = notes_plat_sysinfo_100 = From /proc/meminfo notes_plat_sysinfo_105 = MemTotal: 14229752 kB notes_plat_sysinfo_110 = HugePages_Total: 0 notes_plat_sysinfo_115 = Hugepagesize: 2048 kB notes_plat_sysinfo_120 = notes_plat_sysinfo_125 = /usr/bin/lsb_release -d notes_plat_sysinfo_130 = Ubuntu 20.04.2 LTS notes_plat_sysinfo_135 = notes_plat_sysinfo_140 = From /etc/*release* /etc/*version* notes_plat_sysinfo_145 = debian_version: bullseye/sid notes_plat_sysinfo_150 = os-release: notes_plat_sysinfo_155 = NAME="Ubuntu Kylin" notes_plat_sysinfo_160 = VERSION="20.04.2 LTS (Focal Fossa)" notes_plat_sysinfo_165 = ID=ubuntu notes_plat_sysinfo_170 = ID_LIKE=debian notes_plat_sysinfo_175 = PRETTY_NAME="Ubuntu 20.04.2 LTS" notes_plat_sysinfo_180 = VERSION_ID="20.04" notes_plat_sysinfo_185 = HOME_URL="https://www.ubuntu.com/" notes_plat_sysinfo_190 = SUPPORT_URL="https://help.ubuntu.com/" notes_plat_sysinfo_195 = notes_plat_sysinfo_200 = uname -a: notes_plat_sysinfo_205 = Linux r7-5800u 5.10.0-1038-oem #40-Ubuntu SMP Fri Jul 16 15:08:30 UTC 2021 notes_plat_sysinfo_210 = x86_64 x86_64 x86_64 GNU/Linux notes_plat_sysinfo_215 = notes_plat_sysinfo_220 = run-level 5 Aug 9 01:39 notes_plat_sysinfo_225 = notes_plat_sysinfo_230 = SPEC is set to: /home/guee/spec2006 notes_plat_sysinfo_235 = Filesystem Type Size Used Avail Use% Mounted on notes_plat_sysinfo_240 = /dev/sda3 ext4 98G 20G 74G 21% / notes_plat_sysinfo_245 = notes_plat_sysinfo_250 = (End of data from sysinfo program) hw_cpu_name = AMD Ryzen 7 5800U with Radeon Graphics hw_disk = 98 GB add more disk info here hw_memory001 = 13.571 GB fixme: If using DDR3, format is: hw_memory002 = 'N GB (M x N GB nRxn PCn-nnnnnR-n, ECC)' hw_nchips = 1 prepared_by = guee (is never output, only tags rawfile) sw_file = ext4 sw_os000 = Ubuntu 20.04.2 LTS sw_os001 = 5.10.0-1038-oem sw_state = Run level 5 (add definition here)